Home | Chinese Version
Your current position:English.lf.gov.cn >> Investment Guide >> Key Investment Promotion Projects >> Read Article

2016 LangFang Key Project Introduction - Advanced Manufacturing Projects

2016-5-10 10:57:33    Hits:

Diameter-transformed, Close-packed Solar Water Heater Production Project

 

  Product content: It is proposed to cover an area of 152 mu, with an annual production of 800,000 diameter-transformed, close packed solar water heater.

  Investment estimation and sources of funds:  Total investment is 358 million yuan (about 52.65 million dollars, exchange rate 1: 6.8, the same as below.), among which 20 million dollars are proposed to be foreign capital.

  Economic benefit analysis: After production, annual output value of 680 million yuan, profit 208 million yuan, taxes 52 million yuan.

  Market analysis: Now the solar energy sales mainly rely on the retail console. With the development of small-high level buildings, products in the market can’t meet the growing demand of real estate industry. After ten years of research and application in the market, our company’s products prove perfect and have a broad market.

  Construction condition: The area in which the project is to be constructed has good infrastructure, leveled land and convenient transportation.

  Product undertaking organization: Sanhe Hualong New Energy Co.,Ltd.. Legal representative: Wang Xiuhua.

  Cooperation form: Joint venture or Cooperation.

  Contact us: Contact Person: Wang Rong.

  Tel: 0086-316-3327823

   Fax:0086-316-3327823

  Address: 1 Xinggong East Street, Yanjiao, East of Beijing, China

  Zip code: 065201        

  E-mail: vrabbit@yanjiao.gov.cn

 

  The project of Annual output of 1,000 sets of airport ground

 

  Project Content: The project planning area 68099㎡ (combined 102.15 acres). The main office building contents, building, cutting, welding, assembly plant, guard room, air compressor room, etc., and other ancillary buildings with a total construction area of 82553.15㎡.

  Investment Estimation and Fund Source: The total investment is estimated at $ 50 million,The amount of foreign capital will be utilized $6 million.

  Market Analysis:The project market risk mainly from technological progress of competitors, their management, product cost and other changes in business.

  Benefit Analysis: Project calculation period normal annual profit of $ 11,521,600, normal annual income tax $ 2,880,400.

  Construction ConditionsThe main raw material for the steel project, steel, aluminum, brass and other raw materials, raw materials are purchased from local, long-term fixed suppliers. This project uses advanced production technology.

  General Description of Chinese Sponsor: Langfang zhongji Airport Equipment Co., Ltd.

  Cooperative Form: Corporate-owned

  Contact Person: ligang.zhang

  Tel:18611313162

  Fax:

  Address: Dachang Chaobai River Economic Development Zone

  Post Code: 065300

  E-mail:zhangligang14@163.com

 

  Automotive Park Project

 

  Project Content: The project is planned to cover an area of ​​300 acres and the proposed building area is 20 square meters. The project mainly produces automotive wheels, special steering, filters, piston rings, sensors, thermostats, ABS devices, instrument cluster, special anti-lock braking death system Accessories, clutch assembly systems and other products.

  Investment Funds and Sources: The estimated total investment is $ 800 million. Self-financing.

  Economic Benefit Analysis: After the project is fully operated, it can achieve an annual sales revenue of $ 5 billion and a profit of $ 100 million.

  Construction Condition: The current Dachang Industrial Zone has planned 500 acres of area automobile industry, and the park has realized the "seven-connection and one-leveling".

  China Organizer: The Dachang Hui Autonomous County is under the jurisdiction of Langfang City, Hebei Province, and it is the latest minority autonomous county from capital Beijing. It has Tongzhou district, Beijing  on its west separated by a river (Chaobai River), with a bridge connecting each other. The driving distance from it to Tiananmen Square is 42 km. In March, 2006, approved by Hebei Provincial People's Government, Dachang Industrial Park upgraded to a provincial development zone.  In the "Big Beijing's new blueprint", Dachang Industrial Development Zone is located in the intersection of the Jingdong axis and the eastern development zone, it is a planned modern manufacturing and high-tech industrial base. Excellent geographical location and favorable investment costs have made it become the most potential costs depression and a modern industrial park with the biggest investment value of Jingdong.

  Cooperation: Sole

  Contact: Xu Shiyan

  Tel: 0086-10-80842589  15097600616

  Fax: 0086-316-8861525

  Address: Management Committee of Dachang Industrial Park, Dachang Hui Autonomous County, Langfang, Hebei

  E-mail: 641183899@qq.com

 

  Urban Rail Vehicle Car Production Base Construction Project

 

  Project Content: The project covers an proposed area of 300 acres . It is to build light rail vehicle research, production and testing base. A project includes preparation bogie production area, vehicle production area, assembly area commissioning, production support areas, dynamic testing, storage areas, forming an annual output of stainless steel body of urban rail vehicles 300, and 600 forward.

  Investment Funds and Sources: The estimated total investment is of $ 100 million. Self-financing.

  Market Analysis: the development of urban light rail vehicles is supported and encouraged by the provincial and municipal government's policy. Building light rail vehicles vehicle production base in Beijing, Tianjin region can take advantage of a rail vehicle industry cluster advantages, supporting the province and related industries coordinated development.

  Economic Benefit Analysis: After the project put into production, annual sales income is of $ 200 million, $ 10 million of tax.

  Construction Condition: The current Dachang Industrial Zone has planned 1,000 acres of land, the park has realized the "seven-connection and one-leveling".

  China Organizer: The Dachang Hui Autonomous County is under the jurisdiction of Langfang City, Hebei Province, and it is the latest minority autonomous county from capital Beijing. It has Tongzhou district, Beijing  on its west separated by a river (Chaobai River), with a bridge connecting each other. The driving distance from it to Tiananmen Square is 42 km. In March, 2006, approved by Hebei Provincial People's Government, Dachang Industrial Park upgraded to a provincial development zone.  In the "Big Beijing's new blueprint", Dachang Industrial Development Zone is located in the intersection of the Jingdong axis and the eastern development zone, it is a planned modern manufacturing and high-tech industrial base. Excellent geographical location and favorable investment costs have made it become the most potential costs depression and a modern industrial park with the biggest investment value of Jingdong.

  Cooperation: Sole

  Contact: Xu Shiyan

  Tel: 0086-10-80842589  15097600616

  Fax: 0086-316-8861525

  Address: Management Committee of Dachang Industrial Park, Dachang Hui Autonomous County, Langfang, Hebei

  E-mail: 641183899@qq.com

  Soft bed furniture and living room furniture products projects

 

  Project content: The proposed base in Hebei Xianghe Environmental Protection Industrial Park.Project planning area of 350 acres of land (square meters), the first phase of 2000,000 square meters of software for the furniture factory; the second 150,000 square meters of logistics and warehousing center.
      Investment and funding sources: The total project investment of $ 200,000,000, including the use of foreign capital of 90000000 dollqrs.

  Market analysis: production and marketing of the project, the high-end suites, living room, study, coffee table and dining furniture, etc., there are 700 sets of advanced production equipment (sets). Group is under the jurisdiction of furniture factory, sofa, coffee table factory, marble factory, plant table, TV cabinet factory, mattress factory. Products are exported to Japan, Korea, Central Asia and other countries and regions.

  Construction Conditions: The project site is located in Xianghe Environmental Protection Industrial Park,Xianghe environmental protection industrial park has implemented a nine Ping, complete infrastructure, convenient transportation

  Chinese enterprise: Limited, registered capital of 150 million yuan 
  Economic efficiency: output: 850 million yuan, profit: 30,000 million yuan, tax: 57 million yuan Cooperation

  Cooperation: Joint venture

  Contact Way:

  Contact: Liu Hongtao

  Position: Secretary Merchants

  Unit Name: furniture industry base in north China Management Board          

  Address: On Road One double Xianghe

  Tel :0086 -0316-8268988    

  Fax :0086 -0316-8268988

  Post code: 065400   

  Website: www.xhjjgyy @ sina.com

 

  Frozen prepared food items  Annual output of 8000 tons

 

  1)Project Content: The project in the park will Frozen prepared food production project, which can reach the capacity of 1000 tons of frozen prepared food.

  2)Investment Estimation and Fund Source: The total investment is 9500 thousands of dollars, Self-raised capital source for units .

  3)Market AnalysisRegulate the food market is mainly oriented in family fast food Tourist population conference dinner school meals, etc. Frozen prepared food it is typical’ In the food’ Products of domestic frozen prepared food market is almost a blank

  4)Benefit Analysis: The yearly output value can reach 95 million dollars,  sales revenue can reach 90 million dollars with the profit of 28million dollars and the tax revenue of 4 million dollars.

  5)Construction Conditions :The project site is located in Xianghe Environmental Protection Industrial Park,Xianghe environmental protection industrial park has implemented a nine Ping, complete infrastructure, convenient transportation

  6)General Description of Chinese Sponsor: Hebei first environmental protection industrial park management committee, adhere to the "government, business, market operation" model of development, the guoxing investment co., Ltd. is responsible for the park's overall development, infrastructure construction, investment promotion and capital introduction work, at present, the park has implementation of nine on a flat, infrastructure construction is complete.

  7)Cooperative Form: sole proprietorship

  8)Contact Way:        Contact Person: Huxuguang     

  Tel:0086-316-8268988     Fax: 0086-316-8268988  

  Post Code: 065400         E-mail: xhjjgyy@sina.com

  Address: Hebei first environmental protection industrial park management committee

 

  Integrated furniture, home improvement projects

 

  Project content: The proposed base in Hebei Xianghe Environmental Protection Industrial Park. The total planned land area of 300 acres (200,000 square meters), of which 150,000 square meters area of the factory workshop, office and living space of 44,000 square meters, 32,000 square meters   Storehouse

  Investment and funding sources: The total project investment of $ 150 000000, including the use of foreign capital of 60000000 dollars.

  Market analysis: The main objectives of the project in North China, Northeast region, is specialized in large-scale civil engineering and interior furniture, furniture supporting the professional factory. Consists of sliced wood veneer plant, veneer press paste factory, doors plant, plant cabinets, floor plants, veneer sales of six departments, independent undertaking large-scale hotels, apartments, office decoration project, and to other decoration company matching. Project has good prospects for development.

  Construction Conditions: The project site is located in Xianghe Environmental Protection Industrial Park,Xianghe environmental protection industrial park has implemented a nine Ping, complete infrastructure, convenient transportation

  Chinese enterprise: Limited, registered capital of 130 million yuan

  Economic efficiency:  estimated annual output: 370 million yuan, profit: 100 million yuan

  Cooperation: Joint venture

  Contact Way:

  Contact: Liu Hongtao

  Position: Secretary Merchants

  Unit Name: furniture industry base in north China Management Board          

  Address: On Road One double Xianghe

  Tel :0086 -0316-8268988    

  Fax :0086 -0316-8268988

  Post code: 065400   

  Website: www.xhjjgyy @ sina.com

 

  Auto parts manufacturing projects

 

  Project content: The proposed base in Hebei Xianghe Environmental Protection Industrial Park.Planned land area is 300 acres , which covers an area of 150,000 square meters factory, office building covering 10,000 square meters.

  Investment and funding sources: A total investmeng of 250000000 US dollars

  Market analysis: To stimulate the rapid development of automobile industry chain upstream of auto parts . The domestic auto parts market demand scale expanding domestic parts the huge demand of the market and big profits. Attracted a large number of foreign companies into the domestic market

  Economic benefit: A steady rise in economic indicators.

More can create considerable social benefits, More job opportunities Ease the employment pressure

  Construction Conditions: The project site is located in Xianghe Environmental Protection Industrial Park,Xianghe environmental protection industrial park has implemented a nine Ping, complete infrastructure, convenient transportation

  General Description of Chinese Sponsor: Hebei first environmental protection industrial park management committee ,adhere to the "government, business, market operation" model of development, the guoxing investment co., Ltd. is responsible for the park's overall development, infrastructure construction, investment promotion and capital introduction work, at present, the park has implementation of nine on a flat, infrastructure construction is complete.

  Cooperative Form: sole proprietorship

  Contact Person: Huxuguang      

  Tel:0086-316-8268988  

  Address: Hebei first environmental protection industrial park management committee

  Post Code: 065400       

  E-mail: xhjjgyy@sina.com

  In greenhouses geothermal heating system project

 

  Project content: The proposed base in Hebei Xianghe Environmental Protection Industrial Park .Planned land area is 350 acres ,which covers an area of 190,000 square meters factory, office building covering 9,000 square meters.

  Investment and funding sources: A total investmeng of 200000000 US dollars.

  Market analysis: Now temperate zone and frigid zone of greenhouse, agricultural production of greenhouses, especially in winter, Although there are providing solar heat But far cannot satisfy the need of temperature condition. In order to better promote the greenhouse, agricultural production of greenhouses, to design a kind of greenhouse, greenhouses geothermal heating system, To meet the needs of its agricultural production ,So as to achieve the greenhouse, Shed the effective environmental protection of agricultural production the benefit of human,.

  Economic benefit: The project is feasible scientific and practical environmental protection ,market development prospect, Investment economy benefit and social benefits immeasurably.

  Construction Conditions: The project site is located in Xianghe Environmental Protection Industrial Park,Xianghe environmental protection industrial park has implemented a nine Ping, complete infrastructure, convenient transportation

  General Description of Chinese Sponsor: Hebei first environmental protection industrial park management committee ,adhere to the "government, business, market operation" model of development, the guoxing investment co., Ltd. is responsible for the park's overall development, infrastructure construction, investment promotion and capital introduction work, at present, the park has implementation of nine on a flat, infrastructure construction is complete.

  Cooperative Form: sole proprietorship

  Contact Person: Huxuguang      

  Tel:0086-316-8268988  

  Fax: 0086-316-8268988  

  Address: Hebei first environmental protection industrial park management committee

  Post Code: 065400       

  E-mail: xhjjgyy@sina.com

 

  Soft bed furniture and living room furniture series

 

  Project content: in the Hebei Xianghe Shu Yang Industrial park. Project planning total land area of 280 acres (square meters), the first phase of 200000 square meters of soft furniture factory; second to 150000 square meters of warehousing logistics center.

  Total investment and capital sources: the total investment of the project is $160 million, including the use of foreign capital $90 million.

  Market analysis: the production of luxury suites, a living room, study room, tea table and dining furniture, with advanced production equipment more than 600 Taiwan (sets). The group now has jurisdiction over the furniture factory, sofa factory, tea factory, marble factory, table, TV cabinet factory factory, mattress factory. The products are exported to Japan, South Korea, Central Asia and other countries and regions.

  Construction conditions: the project site is located in Xianghe Shu Yang Industrial Park, Xianghe Shu Yang Industrial Park realized "nine connections and one leveling", complete infrastructure and convenient transportation.

  Status of Chinese Enterprises: limited company, registered capital of 130 million yuan

  Economic benefits: output: 850 million yuan, 300 million yuan, profits tax: 57 million yuan,

  Cooperation mode: joint venture.

  Contact person: Liu Yan post: Director of the Economic Committee Office

  Company name: Xianghe County Economic Commission Office Yang Zhen Shu

  Address: Xianghe County town of Shu Yang

  Tel: 0086-0316 8322224

  Fax: 0086-03168322429

  Postal code: 065400

  Website: www.xhsyjw@163.com

 

  Furniture decoration integrated factory project

 

  Project content: in the Hebei Xianghe Shu Yang Industrial park. Project planning total land area of 200 acres (130000 square meters), the factory production workshop 110000 square meters, 36000 square meters of office and living room, 281000 square meters warehouse

  The investment estimation and fund sources: the total investment of $180 million,. The use of foreign capital $50 million.

  Market analysis: the main objectives of the project in the north and northeast regions, is a professional engaged in large-scale civil engineering and interior furniture, furniture accessories professional factory. Under the wood veneer slicing plant, veneer pressing paste factory, wooden door factory, cabinet factory, factory floor, single plate sales of six departments, independent undertaking large hotels, apartments, office building decoration engineering, and to other decoration company matching. The project has good prospects for development.

  Construction conditions: the location of the project is located in Xianghe environmental protection industrial park, Xianghe Park, the environmental protection industry realized "nine connections and one leveling", complete infrastructure and convenient transportation.

  Status of Chinese Enterprises: limited company, registered capital of 150 million yuan

  Economic benefits: annual output value: 370 million yuan, profit 100 million yuan.

  Cooperation mode: joint venture.

  Contact person: Liu Yan post: Director of the Economic Committee Office

  Company name: Xianghe County Economic Commission Office Yang Zhen Shu

  Address: Xianghe County town of Shu Yang

  Tel: 0086-0316 8322224

  Fax: 0086-03168322429

  postal code: 065400

  Website: www.xhsyjw@163.com

 

  An annual output of 200 thousand sets of stove hood project

 

  The content and scale of the project: the park covers an area of 40 acres, the construction of the production workshop and related ancillary facilities, a total construction area of 35 thousand square meters.

  Total investment: the total investment of $32 million, the total utilization of foreign capitals.

  Market analysis: with the development of science and technology and the improvement of living standards, the beautification of the environment that occupy the home of cooker hood appearance quality requirements increasing. Stove hood project has a broad market.

  Economic benefit analysis: the annual output value is expected to reach $48 million, sales revenue of $50 million, profit $10 million, $2 million in tax.

  Construction conditions: Xianghe County, Hebei, Shu Yang Industrial Park is located in the hinterland of Beijing, Tianjin, adjacent Jinghagaosu highway exit, starting area has been fully realized "nine connections and one leveling", investment environment superior.

  Brief introduction of Chinese organizer: Xianghe County, Hebei, Shu Yang Industrial Park for the approval of the provincial government of Hebei Provincial Park, adhere to the "government promotion, enterprise operation, the operation of the market" model of development, the park has realized "nine connections and one leveling", infrastructure complete.

  Cooperation: sole.

  Contact person: Liu Yan post: Director of the Economic Committee Office

  Company name: Xianghe County Economic Commission Office Yang Zhen Shu

  Address: Xianghe County town of Shu Yang

  Tel: 0086-0316 8322224

  Fax: 0086-03168322429

  postal code: 065400

  Website: www.xhsyjw@163.com

 

  Guangyang Automobile Parts Processing Base of Langfang

 

  Project content: Project covers an area of 650mu with the total building area being 0.34632 million square meters used for the construction of raw materials and accessories area, production area, logistics distribution region, assembly area, finished product area, research and development center, office buildings, auxiliary facilities and public facilities.

  Investment Estimation and Funding Sources:  The total estimated investment of this project 440 million dollars.

  Market Analysis: The Beijing-Tianjin region is one of the relatively collective production areas of vehicles and their components and parts in China. By virtue of the unique regional advantage of locating in the central position of Beijing, Tianjin and Hebei, and the enormous production and consumption markets of the whole units and components of automobiles in the area, the development space of our district to set up a production and processing base of auto parts in Guangyang Development Zone of Langfang can be very large.

  Economic Effectiveness Analysis: After the completion of the project, the annual sales revenue can reach 3 billion yuan and a sales profit of 675 million yuan can be realized annually with the profit rate of investment being 25% and the investment payoff period being 5 years.

  Construction Condition: Guangyang Economic Development Zone of Langfang lies in the southeast corner of Langfang. It is bounded on the north by Langfang Economic Development Zone, on the south by Foxconn Industrial Park, on the west by the downtown area of Langfang and on the east by the boundary of Tianjin and the Beijing-Shanghai High-speed Rail Freight Yard of Langfang. A unique location advantage depending on the central city, airports and seaports to develop the economy is formed.

  Investment Environment:  The Guangyang Economic Development Zone of Langfang lies in the southeast of Langfang's main urban area with the planning area being 28 square kilometers. It is included in the present round of overall urban planning and overall planning for land utilization in Langfang, and this area is the only remaining piece of industrial land in the back-land of Beijing-Tianjin-Hebei region currently.

  Cooperative Forms: Joint capital, collaboration and sole proprietorship

  Contact Persons: Wang Wei and Pang Zhenyu

  Company Name: Investment Promotion Department of Guangyang Economic Development Zone, Langfang, Hebei

  Contact Address: Midpiece, East Ring Road, Langfang

  Contact Number: 0086-316-2833888, 2833666

  Fax: 0086-316-2833900

  E-mail: lfgica@163.com       Website: www.lfgica.cn

 

  The project of Auto Electronic Control System

 

  Project Content: Covering an area of 70 mu and gross building area of 50,000m2, this project is designed to realize annual output of 1million pieces (or sets) vehicle electronic devices (such as touch and electronic instruments, closed circuit TV systems, reverse monitoring system and so on) and to construct a monitoring laboratory of electronic devises. It is also to be equipped with production equipment such as full automatic optical inspection machines, printing machines, automatic dispensers, midsized high-speed chip mounters, midsized multiple-use chip mounters, high-speed skipped stitching, axial and radial component inserters and so on.

  Investment Estimation and Fund Source: Total investment of this project is USD 40 million, including USD 25 million of self-raised funds and USD 15 million to be raised.

  Market Analysis: Nowadays, consumers’ requests to performances of automobiles like safety, comfort and entertainment, etc. are increasing, while the government is requiring more and more strict regulations and standards on vehicle’s safety, energy saving and eco-friendly performance. At the meantime, the progress of electronic information technology and its penetration towards vehicle manufacture process are speeding up. Therefore, electronizaion, informatization and intellectualization will become new development directions of automobile industry, and soon they will be the most striking emerging growth in global automobile industry.      

  Benefit Analysis: This project has a total investment of USD 40 million. By estimation, it can reach the annual sales revenue of USD 35 million and profit of USD 11 million.

  Construction Conditions: This Project is planned to be located in  Longhe High-tech Industry Zone. South Langfang, The total planned area of 37.5 square kilometers, of which a 28 kilometers, It is 40 kilometers and 60 kilometers distant from the downtown Beijing and Tianjin, respectively.Under the premise of remarkable geographic advantage, well-established infrastructure can be used to meet construction needs of this Project at various aspects.

  General Description of Chinese Sponsor: It is successively appraised as“Langfang Information Industry Base of National Plan for Medium- and Long-term Scientific and Technological Development”, “Provincial-level High-tech Industry Demonstration Zone and the first batch of “Provincial-level Industry Clustering Zone”. High-tech Industry Zone is located in Beijing and Tianjin municipalities, two golden point, a "three-ring" advantage Bohai Sea, around Beijing and Tianjin, Our park have intensive industries and wide horizo of development in the market.The traffic network made up of High-speed railway,expressway,railway transport,airport and port is very convenient.

  Cooperative Form: joint venture or cooperation

  Contact Way

  Contact Person: Sun Wenxin      

  Tel:0086-316-2670888

  Fax: 0086-316-2670888

  Address: Anci District Office Building,No.39,Nanlong Road,Anci District,Langfang City,Hebei Province

  Post Code: 065000              E-mail: wenxinsun163@163.com

 

  The project of   Hydraulic System

 

  Project Content: This project covers an area of 90 mu and has gross building area of 48,000 m2. It takes advanced development technology of hydraulic elements to build 16 high-pressure fuel tank production lines, 2 high-pressure pipeline production lines, four engineering machinery tank production lines. Yearly capacity is 400,000 by plan.

  Investment Estimation and Fund Source: Total investment of this project is USD 48 million.

  Market Analysis:As one of the key component of engineering machinery products, hydraulic elements can present overall operation performance and the overall efficiency of machines, but also they can be the main fault sources of the whole machines. For a long time, in the field of high-pressure high-flow hydraulic devices, products from domestic factories are still difficult to meet machinery factories’ requirements; especially for hydraulic system of excavators, manufacturers mainly use products made in Japan or Korea. According to statistics by the department concerned, the production value of hydraulic industry reached more than RMB 20 billion Yuan in 2012. The large amount of import also means alternative space. Therefore, this project has a great development prospect.

  Benefit Analysis: This project has a total investment of USD 48 million. By estimation, it can reach the annual sales revenue of USD 64 million and profit of USD 16 million.

  Construction Conditions: This Project is planned to be located in  Longhe High-tech Industry Zone. South Langfang, The total planned area of 37.5 square kilometers, of which a 28 kilometers, It is 40 kilometers and 60 kilometers distant from the downtown Beijing and Tianjin, respectively.Under the premise of remarkable geographic advantage, well-established infrastructure can be used to meet construction needs of this Project at various aspects.

  General Description of Chinese Sponsor: It is successively appraised as“Langfang Information Industry Base of National Plan for Medium- and Long-term Scientific and Technological Development”, “Provincial-level High-tech Industry Demonstration Zone and the first batch of “Provincial-level Industry Clustering Zone”. High-tech Industry Zone is located in Beijing and Tianjin municipalities, two golden point, a "three-ring" advantage Bohai Sea, around Beijing and Tianjin, Our park have intensive industries and wide horizo of development in the market.The traffic network made up of High-speed railway,expressway,railway transport,airport and port is very convenient.

  Cooperative Form: solely-funded

  Contact Way

  Contact Person: Sun Wenxin

  Tel:0086-316-2670888

  Fax: 0086-316-2670888

  Address: Anci District Office Building,No.39,Nanlong Road,Anci District,Langfang City,Hebei Province

  Post Code: 065000         E-mail: wenxinsun163@163.com

 

  R&D and Production Base for Automotive Electronic Components Project

  Project Content and Scale: This project covers an area of 60 mu and its overall floorage is 48,510 square meters, which includes office building, manufacturing workshop, canteen and warehouse. After completion of the project, the annual output of electronic throttle valve assembly, solenoid valve, and electronic snuffle valve as well as gasoline turbocharger is 2000 pieces.

  Investment Estimation and Fund Source: The total investment amounts to 60 million US dollar and 25 million US dollar thereof is expected to be introduced as foreign funds.

  Market Analysis  With the rapid development of automobile market, in the past 5 years, China’s automobile industry has achieved more than 20% of annual growth rate, thereby becoming the largest automobile manufacturer and consumer in the world. The development of auto industry provides a huge market for automobile component manufacturers. In 2014, operating income of China’s automobile component exceeded 3 trillion RMB. In 2015, with the new changes in the economic situation at home and abroad, market competition has formed a new pattern. The advancement of component quality requirements, the adoption of new energy technology and the development of new generation automobile electronic component have become the focus of automotive parts enterprise.

  Benefit Analysis: After completion of the project, the annual sales income is expected to achieve 75 million US dollar, of which 15 million US dollar are taxes. The project can incept 400 employees.

  Construction Conditions: Now, supporting facilities including road network, heating station, water supply plant, sewage disposal plant, sewage pumping station, electric substation, and service center for fuel gas, correspondence and business incubation have been build and put into use. The project is able to attract and support large scale projects.

  General Description of Chinese Sponsor: Langfang Emerging Industry Demonstration Area of Hebei province is a provincial area approved by the provincial government in 2010. In November 2014, the area is approved by the provincial government as Langfang industrial development zone for high and new technology. Total planning area is 73 square kilometers. Based on the functional orientation of emerging industry cluster, high and new technology industry incubation and low carbon economy pioneer, the demonstration are stresses on the development of emerging industries such as electronic information, new energy, new materials, high-end equipment manufacturing, etc, make it a preferred area of taking over relocated high-end industry in Beijing and Tianjin.

  Cooperative Form: Joint venture and cooperation.

  Contact Person: Tian Lei

  Tel 0086-316-8669888     0086-18603169557

  Fax: 0086-316-8669888  

  Address: Langfang Emerging Industry Demonstration Area of Hebei province, Administrative committee

  Post Code: 065000

  E-mail: lftianlei@163.com

 

  Carbon Fiber Composite Automotive Subassembly Project

  Project Content and Scale: This project covers an area of 130 mu and its overall floorage is 115,000 square meters, which includes integrated office building, R&D center, manufacturing workshop and auxiliary facilities. After completion of the project, the annual output of carbon fiber composite automotive subassembly is 1500 tons.

  Investment Estimation and Fund Source: The total investment amounts to 75 million US dollar and 35 million US dollar thereof is expected to be introduced as foreign funds.

  Market AnalysisGlobal auto makers are committed in the R&D of new energy automobiles. To save on fuel consumption and reduce environmental pollution has become an important developing direction of auto industry technology, and the introduction of high-performance light material is one of the key approaches to achieve lightweighting of automobiles. Currently, automobile brands including Benz, BMW, Audi and VW are breaking new grounds in the carbon fiber field, sourcing and selecting suppliers for carbon fiber composite and establish strategic cooperation with them so as to work together on building an integrated team composed by complete vehicle enterprise, manufacturing firm for carbon fiber materials and composite. Furthermore, they achieved breakthroughs in key techniques including design, materials, manufacturing, inspection and equipment, and build a solution for mass and fast production of carbon fiber composite automotive components.

  Benefit Analysis: After completion of the project, the annual sales income is expected to achieve 92 million US dollar, of which 17 million US dollar are taxes. The project can incept 300 employees.

  Construction Conditions: Now, supporting facilities including road network, heating station, water supply plant, sewage disposal plant, sewage pumping station, electric substation, and service center for fuel gas, correspondence and business incubation have been build and put into use. The project is able to attract and support large scale projects.

  General Description of Chinese Sponsor: Langfang Emerging Industry Demonstration Area of Hebei province is a provincial area approved by the provincial government in 2010. In November 2014, the area is approved by the provincial government as Langfang industrial development zone for high and new technology. Total planning area is 73 square kilometers. Based on the functional orientation of emerging industry cluster, high and new technology industry incubation and low carbon economy pioneer, the demonstration are stresses on the development of emerging industries such as electronic information, new energy, new materials, high-end equipment manufacturing, etc, make it a preferred area of taking over relocated high-end industry in Beijing and Tianjin.

  Cooperative Form: Joint venture and cooperation.

  Contact Person: Tian Lei

  Tel 0086-316-8669888   0086-18603169557

  Address: Langfang Emerging Industry Demonstration Area of Hebei province, Administrative committee

  Post Code: 065000        E-mail: lftianlei@163.com

 

  The project of injection moulding

 

  Project Content: This project uses 1, solvent debinding sintering in vacuum     vacuum debonding sintering .This project uses 2, catalyzed by BASF      vacuum sintering ,the two process routes for injection type products, stainless steel, alloy steel material. Plant layout of the production workshop four, office building, R & D center, staff dormitory building each one and other ancillary accommodations.

  Investment Estimation and Fund Source: Projects with a total investment of $48.38 million, plans to use $20 million more.

  Market Analysis: Metal powder injection molding (MIM) technology through the progress and development of twenty years has quickly become a new technology of new technology of powder metallurgy industry in the development of product performance significantly, the increasing scope of application, has been in the world has a $2 bilion market size and momentum, prospects worth looking forward to.

  Bencfit Analysis: The estimated annual sales income of 80milion RMB, profits and taxes 1.22milion RMB.

  Construction Conditions: This project in Yongqing County of Langfang province Hebei city Bie Guzhuang Zhen, Yongqing county is located in Beijing, Tianjin, Hebei "Golden Triangle" center, West Wiratchant Gallery, in the construction of the Beijing high-speed, the north and the Beijing big seven ring dike River, traffic is very convenient; at the same time, Yongqing county is rich in natural gas, geothermal resources, sufficient energy supply and good green ecological environment provides the development conditions be richly endowed by nature as a base. The construction of the project meets the requirements of the planning area.

  General Description of Chinese Sponsor: Langfang Qingrun Investment Co. Ltd.

  Cooperative Form: Wholly foreign-owned

  Contact Way

  Contact Person: Xiongfei Yu  

  Tel: 0086-316-2363005.

  Fax: 0086-316-2363008.

  Adress: Yongqing County of Langfang province Hebei city Bie Guzhuang Zhen (the new East District of Taiwan industrial)

  Post Code:065600.   

  E-mail:Chinatitan@163.com

 

  The project of air-transportation related  light manufacturing base

  Project Content: The research and development centerproduction plantmarketing center and office building of the air-transportation related light manufacturing base. Project covers an area of 133 thousand square meters, and the total construction area are 150 thousand square meters.

  Investment Estimation and Fund Source: The total investment of the project is 100 million dollars, and it is all foreign investment.

  Market AnalysisIt is good when the second international airport of Beijing is open to navigation in 2019.

  Benefit Analysis: Expected annual operating receipt is 150 million dollars, and profit and tax are 20 million dollars.

  Construction Conditions: Road, water supply and drainage and other infrastructure facilities, fully furnished.

  General Description of Chinese Sponsor: Yongqing New District is located in Yongqing County, 60 kilometers from Beijing, 64 kilometers from Tianjin, 10 kilometers from the second international airport of Beijing, and 80 kilometers from Tianjin New Port. There are 8 expressways near new district. The three main industries are aviation supporting services, airport high-end manufacturing and modern service industry.

  Cooperative Form: Sole proprietorship.

  Contact Person: Zhang Yongpeng

  Tel: 0086-316-5691716

  Fax: 0086-316-5691701

  Address: Urban and Rural Planning Bureau, Jinque Road, Yongqing County, Hebei Province,China.

  E-mail: zhangyongpeng1@cfldcen.com

 

 

  The project of Large furniture manufacturing projects

 

  Project Content: The main production of metallic glass furniture or furniture and other products, covers an area of about 150 acres.

  Investment Estimation and Fund Source: The project total investment of $ 48 million.

  Market Analysis:Shengfang furniture companies have more than 1,300, more than 100 above-scale enterprises, with an annual output of metal glass furniture 45 million (sets), involving 4,000 varieties of products are sold throughout the country and exported to the United States, Japan, Russia, Southeast Asia, the European Union more than 50 countries and regions, exports 30% -40% annually.

  Construction Conditions:Shengfang transportation is very convenient, roads, electricity, communications, water supply, drainage, gas, broadband, land and other infrastructure in the region has reached a "seven-level" standard.

  Benefit Analysis: The project construction period is 1 year after the project is completed, the annual output value of 80 million U.S. dollars, profits of 60 million yuan.

  General Description of Chinese Sponsor: Shengfang town located in Beijing, Tianjin, security triangle centers in the hinterland, 120 kilometers from Beijing, Baoding, 130 kilometers, Tianjin, 35 kilometers, the transportation is convenient, 2005 Shengfang furniture industry became the sixth country regional specialties base - "China Metal glass furniture industry base. "

  Cooperative Form: Joint ventures, cooperation

  Contact Person: FAN Guodong

  Tel:0086-316-7867316

  Fax: 0086-316-7867316

  Address: Bazhou administrative center Room 1611

  Post Code: 065700

  E-mail: bzzsfwzx@163.com

 

 

  The project of Machinery manufacturing production

 

  Project Content: The project required the production of the furniture industry, metal industry and other sectors of machinery and spare partscovers an area of 100 acres.

  Investment Estimation and Fund Source: The total investment is $ 2 million.

  Market Analysis:Katsuyoshi town with the furniture industry, metal industry and other manufacturing enterprises more than 5000, for a variety of mechanical parts in great demand. Machinery manufacturing belong Katsuyoshi furniture industry, metal industry, a necessary part of the industry chain, market prospects.

  Construction Conditions:Katsuyoshi town located in Beijing, Tianjin, security triangle centers in the hinterland, 120 kilometers from Beijing, Baoding, 130 kilometers, Tianjin, 35 km, convenient transportation, industrial infrastructure in the region has reached a "seven-level", preferential policies, efficient service.

  Benefit Analysis: The project is expected to achieve sales revenue of 300 million yuan, 40 million yuan in profits and taxes

  General Description of Chinese Sponsor: Triangle Town Center is located in the hinterland of Katsuyoshi Beijing, Tianjin, 120 kilometers away from Beijing, Baoding, 130 kilometers, Tianjin 35 kilometers, the transportation is convenient.

  Cooperative Form: Joint ventures, cooperation

  Contact Person: FAN Guodong

  Tel:0086-316-7867316

  Fax: 0086-316-7867316

  Address: Bazhou administrative center Room 1611

  Post Code: 065700

  E-mail: bzzsfwzx@163.com

 

 

  The project of Northern auto parts production base

 

  Project Content: The project covers an area of 200 mu, the main construction of auto parts production and project.

  Investment Estimation and Fund Source: Planning a total investment of 100 million.

  Market Analysis:Northern auto parts co., LTD. Is mainly engaged in stamping, sheet metal, metal structure, blow molding, injection molding, machining as one of the modern automobile spare parts manufacturing enterprise ,The company's products are mainly for China faw group, foton vehicle co., LTD. (the heavy car factory), Beijing automobile factory, Great Wall motor co., LTD., China aerospace group, such as dozens of large and medium-sized enterprises supporting.

  Construction Conditions:This project is located in bazhou economic and technological development zone, is located in Beijing, tianjin, the center of the golden triangle,

  Benefit Analysis: Return on investment of up to 30%.

  General Description of Chinese Sponsor: In the construction of infrastructure has reached the "eight accesses and one leveling", preferential policies, the production cost is low, management services to improve efficiency.

  Cooperative Form: Joint venture

  Contact Person: Fan Guodong

  Tel:0086-316-7867316

  Fax: 0086-316-7867316

  Address: Bazhou administrative center Room 1611

  Post Code: 065700

  E-mail:bzzsfwzx@163.com

 

 

  The project of furniture parts production

 

  Project Content: The project mainly produce various types of furniture, accessories, mainly used in metal glass furniture, furniture and all kinds of furniture production and assembly, covering about 100 acres.

  Investment Estimation and Fund Source: The project total investment of $ 32 million.

  Market Analysis:Shengfang furniture companies have more than 1,300, more than 100 above-scale enterprises, the annual output value of 10 billion yuan, with an annual output of metal glass furniture 45 million (sets), involving office supplies, teaching supplies, dining table, sofa table, more than 10 congruence class, nearly 4,000 varieties of products are sold throughout the country and exported to the United States, Japan, Russia, Southeast Asia, the European Union, more than 50 countries and regions.

  Construction Conditions:Industrial infrastructure in the region has reached a "seven-level", preferential policies.

  Benefit Analysis: After the completion of the project, the estimated annual output 64 million U.S. dollars, profits of $ 8,000,000.

  General Description of Chinese Sponsor: Sheng Fang town located in Beijing, Tianjin, security triangle centers in the hinterland, 120 kilometers from Beijing, Baoding, 130 kilometers, Tianjin, 35 kilometers, the transportation is convenient, 2005 Shengfang furniture industry became the sixth country regional specialties base - "China Metal glass furniture industry base. "

  Cooperative Form: Joint venture, cooperation.

  Contact Person: Fan Guo Dong

  Tel:0086-316-7867316

  Fax: 0086-316-7867316  

  Address: Bazhou administrative center Room 1611

  Post Code: 065700

  E-mail: bzzsfwzx@163.com

  The project of Auto parts production

 

  Project Content: The project mainly produces all kinds of sheet metal auto parts, automobile shell and other products, production of auto parts supply main supporting automobile manufacturers across the country, covering 100 acres.

  Investment Estimation and Fund Source: The project plans to invest $ 32 million.

  Market Analysis:The automotive industry, in particular parts manufacturing, support a national policy in the field, low risk, high return. Katsuyoshi town is located in Beijing, Tianjin and Baoding three major automobile manufacturing base in the center of the large demand for auto parts, auto parts and has broad market prospects.

  Construction Conditions:Industrial infrastructure in the region has reached a "seven-level", preferential policies, efficient service.

  Benefit Analysis: The project is expected to reach sales of $ 80 million, $ 10 million in profits and taxes.

  General Description of Chinese Sponsor: Sheng Fang town located in Beijing, Tianjin, security triangle centers in the hinterland, 120 kilometers from Beijing, Baoding, 130 kilometers, Tianjin, 35 kilometers, the transportation is convenient, 2005 Shengfang furniture industry became the sixth country regional specialties base - "China Metal glass furniture industry base. "

  Cooperative Form: Joint venture, cooperation.

  Contact Person: Fan Guo Dong

  Tel:0086-316-7867316

  Fax: 0086-316-7867316  

  Address: Bazhou administrative center Room 1611

  Post Code: 065700

  E-mail: bzzsfwzx@163.com

  The project of Annual output of 15000 sets of passenger car and truck frame

 

  Project Content: The project covers an area of 30 mu, the construction of factory building 3000 square meters, building area of 1000 square meters, 500 square meters of accessory occupancy. To purchase 5000 tons of hydraulic press a installation, 2 sets CNC punch press.

  Investment Estimation and Fund Source: With a total investment of $10 million.

  Market Analysis:In recent years, the national automobile industry as the pillar industry of national economy, the constant support policy, to speed up the pace of revitalization of the auto industry. With the increasing of private cars, caused certain pressure to the road traffic. Key cities for the domestic development of bus passenger transport is also the trend of The Times. Therefore, bus passenger car production in the next period.

  Construction Conditions:The project site selection in township Kang Xianzhuang fukang stamping parts co., LTD., adjacent to 112 national road, highway, railway, convenient transportation, water, electricity, gas and other facilities.

  Benefit Analysis: Annual output of 15000 sets of passenger car and truck chassis is expected, with an annual output value 150 million yuan, profit of 3.2 million dollars, tax 10 million yuan.

  General Description of Chinese Sponsor: Project Sponsor - Bazhou Beverly Stamping Co., Ltd. has strong technical force and advanced production equipment, Foton, Hyundai Santa Fe, Tianjin FAW Xiali, Great Wall Motors and other companies supporting suppliers.

  Cooperative Form: Joint venture, cooperation.

  Contact Person: Fan Guo Dong

  Tel:0086-316-7867316

  Fax: 0086-316-7867316  

  Address: Bazhou administrative center Room 1611

  Post Code: 065700

  E-mail: bzzsfwzx@163.com

 

  The Project of Annually Output of 216000 Sets  of Solid Wood Furniture

 

  Project Content:The Project covers an area of 110 mu, planning to construct a floorage of 77284.6 square meters of workshops, storehouses and office buildings and to purchase 493sets of new equipment.

  Investment Estimation and Fund Source: The total investment of the project is 46 million US dollars.   

  Market Analysis: Due to the change of market demand, the adjustment of competitor’s strategy, the decline of sale and low price of the projects, the risks formation by above reasons. People’s living standards improve gradually, the market demand for costly furniture supplies will become larger and larger, as long as to intensify the publicity, sale problems should not occur, so the market risk is small.   

  Construction Conditions: The project locates in the west side of Chuang ye road of Wen’an industrial park, between Xin yua road and Sheng yuan road. East of it is Monteggia boiler and Nine source steel structure project, south of it is the protect of small and medium-sized enterprise innovation park, both the west and the north are open spaces.

The industrial park has have a certain development foundation, all the facilities have improved gradually, the information flow and the position is superior.

  Benefit Analysis: Once the project is in production, it can form the capacity of annual output of 216000 sets of high-grade furniture. creates 480 new jobs, realizing an annual sales income of 58 million dollars. Normal annual profit totals 17 million dollars, sales tax and additional duty 4.3 million dollars.

  General Description of Chinese Sponsor:Founded in 2002, Tianjin Style Transfer furniture Co. Ltd located in Tianjin Wu qing wanggu economic zone, is a comprehensive modern company of furniture design, production and sale. The company now has 250000 square meters of modern workshop, and brings in world-class furniture production equipment and technology from Germany, Italy. Through several years of

Continuous innovation and development, it has introduced “style transfer”,“lotus figure the hammock”, two brand products. The former chooses cloth art sofa as their leading products, through nearly 15 years history in sofa design and production, the product style variety,and because of their perfect shape, excellent quality, reasonable price and high quality after-sales service, they obtain highly trust and wide acclaim by consumers.

Since 2002, less than a decade, it has more than a dozen stores and dealers, more than 40 throughout all parts of the country.The company's products are welcomed in Hubei province, central China, northwest region.Tianjin Style Transfer furniture co., LTD. will broaden further extension to furniture fields, and take active in the national strategic layout, and develop into a large domestic first-class wood industry enterprise in a high speed.

  Cooperative Form: Joint venture or cooperation

  Contact Person: Liu Zhongren

  Tel: 0086-316-13603366777

  Address: Hebei Wen’an Industrial Park Chuangye Road

 

  The project of Color Printing Packing Production

 

  Project Content: The Project covers an area of 40 mu with the area of storehouses, manufacturing plants and office buildings amounting to 22000㎡, and the purchase of equipment 85 sets. Once in production, its production capacity can reach 650,000 square meters annually.

  Investment Estimation and Fund Source: The total investment is 35.2 million US dollars.

  Market Analysis: With the constant development of color printing and packing in Chinese market, users demand for printing quality is increasing. In order to satisfy the market’s demand for printing products of high-end package, a lot of package printing enterprises have introduced foreign high-level printer, and increasingly improve the printing quality of color-printing products. The competitiveness of package printing industry is increasing with every passing day, and people’s demand for the quality of the presswork is increasing, the single mode of printing can not satisfy the demand for exquisite printing. A mount of printing devices manufacturers begin to combine offset printing, gravure printing, flexo printing and screen printing together.

  Construction Conditions: The site selection address is in the southern Yuanqu road of new industrial district of Wen’an with convenient traffic and construction land.

  Benefit Analysis: Once in production, the sale proceeds will reach 7,258,0000 dollars and the profit and tax 5 million dollars.

  General Description of Chinese Sponsor: Wen’an Fuhua packaging products Corporation has 165 employers with the total assets be 653 million yuan, major producing stenochrome such as corrugated case, carton, color boxes, tag and painting album and so on. The main products are packaging boxes produced by the 18 subsidiaries which belong to Beijing Ershang Group, the cold fresh meat color boxes produced by the Beijing Huairou United Meat processing plant, the Beijing konjak color boxes produced by Beijing Vegetable Company and the Cool summer mung bean set color box produced by COFCO and so on.

  Cooperative Form: Joint venture or cooperation

  Contact Person: Fan Baojiang

  Tel: 013903164503

  Fax: 0086-316-5392588

  Address: Wen’an Industry New District

  Post Code: 065803

  E-mail: xwnc588@126.com

 

  The project of Annually output of 500,000  Steel Structure Workshop Section

 

      Project Content: The Project covers an area of 30 mu with the area of storehouses, manufacturing plants and office buildings amounting to 20000㎡, and the purchase 110 sets of equipment. Once in production, its production capacity can reach 500,000steel structure workshop section annually.

     Investment Estimation and Fund Source: The total investment of the project is 25 million US dollars.

     Market Analysis: In the light of the global market, the increase of overseas demand for steel structure in future is reflected in the following several aspects: the first one is the acceleration of the conventionally-fired power plant construction, which means that steel consumption for main plants and boiler steel frame (including nuclear power plants and wind power generation) will increase; the second is the bridges in traffic engineering will increase. Recent years, steel structure adopts in highway bridges has become a main developing trend, especially the bridges over seas and rivers which adopt steel structure a lot. In addition, the steel structure uses in guardrails, toll stations, and traffic signs is increasing: the third one is the steel structure uses in municipal constructions is increasing, such as metro and light rail projects, urban overpasses, viaducts, environmental protection, city public installations and temporary buildings which adopt steel structures increasingly. The fourth one is the steel residential buildings will increase. Many countries have advocated the construction of energy - saving and land - saving housing, the pilot project of steel structure residence, the design of specifications and supporting technology and basic materials. Expanding the varieties of steels that used in construction steel structure positively, improving product property, the prospect of our domestic steel structure export will remain positive. With the overseas market demand changing faster and faster, the market competition is becoming increasingly fierce.

  Construction Conditions: The site selection address is in the southern Yuanqu road of new industrial district of Wen’an with convenient traffic and proper construction land.

 

  Benefit Analysis: Once in production, the sale proceeds will reach 31,120,000 dollars and the profit and tax 2,150,000 dollars.

  General Description of Chinese Sponsor: Beijing Tianya steel structure Corporation was set up in 2000, mainly involved in the design, manufacture, construction, and installation of steel building structure, the registered address is the new industrial district of Wen’an, the whole corporation has 155 employers with the total assets be 483,000,000yuan.

  Cooperative Form: Joint venture or cooperation or sole proprietorship

  Contact Person: Zhang Song

  Tel: 0086-316-18613879999

  Fax: 0086-316-5392588

  Address: Wen’an Industry New District

  Post Code: 065803

  E-mail: xwnc588@126.com

 

  The Project of Electric Actuators Production

  Project Content: The project is planning to construct a floorage of 20000 square meters of workshops, storehouses and synthesized office buildings. The products are widely used in the automatic control system of power stations, oil, steel, metallurgy, chemical industry,oil and gas transmission pipeline, sewage treatment.

  Investment Estimation and Fund Source: The total investment of the project is 20 million dollars, and plan to bring in 20 million dollars of foreign investment.

  Market Analysis: The products are widely used in the automatic control system of power stations, oil, steel, metallurgy, chemical industry, oil and gas transmission pipeline, sewage treatment, so they have a prospect market.

  Construction Conditions: Flat land, nine connections and one smooth, convenient transportation.

  Benefit Analysis: The project can fulfill the output value of 40million dollars, sales revenue of 40million dollars, profit and tax of 2 million dollars.

  General Description of Chinese Sponsor: Wenan economic development zone is located on the north of the county of Wen’an county, east is near the Langcang highway.In 2011.7, it was approved as a provincial development zone which focus on developing equipment manufacturing, electronic information, new energy, new materials, auto parts four big industries.

  Cooperative Form: Cooperation or sole proprietorship

  Contact Person: Sun Guohui

  Tel: 0086-316-5285978

  Fax: 0086-316-5285978

  Address: No. 231 Fengli Road ,Wen’an County, Hebei Province

  Post Code:065800

 

  Project of Annual output of 1 million sets of car parts

 

  Project Content: Project covers an area of 100 mu, total construction area of 80000 square meters, the construction of main factory building, warehouse, office buildings and other accessory occupancy, the purchase of 35 sets of main equipment (sets). After the project put into production, the normal annual capacity of 1 million sets of car parts.

  Investment Estimation and Fund Source: Project total investment is 150 million dollars to utilization of foreign capital of $50 million.

  Market Analysis: An important parts such as automobile suspension arm, and the market demand is bigger, in recent years, China's auto parts industry, affected by various factors, and there are no big changes, a lot of cars, agricultural vehicles manufactured for the project construction provides a good market prospect.

  Construction Conditions: The project located at Dacheng Modern Manufacturing Industrial Park in Hebei Province, with convenient traffic .

  Benefit Analysis:Normal, after the completion of the project with an annual output of 1 million sets of car parts, sales revenue of $200 million, total profit of $80 million.

  General Description of Chineses Sponsor : Langfang xuan peng industrial co., LTD. Is located in langfang city, hebei province dacheng county modern manufacturing industrial park, with the best products and professional sales and technical team, to provide the best products and good technical support and perfect after-sales service. Mainly engaged in processing and sales: auto parts, farm machinery equipment, metal products.

  Cooperation Pattern : joint venture, cooperation

  Contact  Person: BaoQiang  Qiu

  Address: Grand County modern manufacturing Industrial Park

  Tel.: 0086-0316-15530672666

  Post Code:065900

  E-mail: dcxdy@126.com

 

  Project of Annual output of 10 million pieces/sets of precision mechanical parts

 

  Project Content: Project covers an area of 100 mu, total construction area of 56000 square meters, the main construction of the production workshop, warehouse, office and other ancillary facilities, the purchase of main equipment 204 units (sets). After the project put into production, the normal annual output of 10 million pieces/sets of precision machinery parts.

  Investment  Estimation and Fund Source: Project total investment is 150 million dollars to utilization of foreign capital of $50 million.

  Market Analysis: Precision machining as the inevitable outcome of the modern industry, as people manufacturing high-end products, product performance demand is higher and higher, to the parts of the products is also very strict. With the development of engineering technology, the increasingly urgent demand for precision machinery parts, wide prospect of market.

  Construction Conditions: The project located at Dacheng Modern Manufacturing Industrial Park in Hebei Province, with convenient traffic .

  Benefit Analysis:After the completion of the project, the normal annual capacity of 10 million pieces/sets of precision machinery parts, sales revenue of $200 million, total profit of $80 million.

  General Description of Chineses Sponsor : Langfang Pisces machinery manufacture co., LTD is located in langfang city, hebei province dacheng county modern manufacturing industrial park, the company adhere to the principle of "customer first, honesty first", have a strong technology research and development team and the domestic several big mergers, developed with independent intellectual property rights. Mainly engaged in processing and sales: precision machinery parts.

  Cooperation Pattern: joint venture, cooperation

  Contact Person: DeMin  Li

  Address: Grand County modern manufacturing Industrial Park

  Tel. : 0086-0316-13785653999

  Post Code:065900

  E-mail: dcxdy@126.com

  Project ofProcessing 500000 tons of steel structure

 

  Project Content: Project covers an area of 100 mu, total construction area of 40000 square meters, the main construction of the production workshop, warehouse, office and other ancillary facilities, the purchase of main equipment 124 units (sets). After the project put into production, the normal processing 500000 tons of steel structure.

  Investment Estimation and Fund  Source: Project total investment is 100 million dollars to utilization of foreign capital of $40 million.

  Market Analysis: Steel structure because of light weight, high strength and good seismic performance, and is energy-saving and ground-saving, recycled, short construction period, construction and demolition on less environmental pollution, by experts as the "green building" of the 21st century. In recent years, the steel structure with seismic and wind resistance, durable, environmental protection, and the advantages of quick application range widening in our country, the wide prospect of market.

  Construction  Conditions: The project located at Dacheng Modern Manufacturing Industrial Park in Hebei Province, with convenient traffic .

  Benefit Analysis:after the completion of the project in normal processing 500000 tons of steel structure, the sales revenue of $300 million, the total profits of $60 million.

  General Description of Chineses Sponsor : Hebei Kang Tong investment co., LTD is located in langfang city, hebei province dacheng county industrial park, modern manufacturing have the best products and professional sales and technical team, adhere to the integrity and the savings to the customer, adhere to impress clients with their own service. The main business sales: steel structure, steel structure construction.

  Cooperation Pattern: joint venture, cooperation

  Contact Person: ZhaoXiang  Ma

  Address: Grand County modern manufacturing Industrial Park

  Tel. : 0086-0316-13513016345

  Post Code:065900

  E-mail: dcxdy@126.com

 

  Project  of Cans With An Annual Output of 2.6 Billion Zip-top Cans  and 0.5 Billion   Milk Powder Cans  .

 

  Project Content: The project covers an area of 200 mu, building area of 75,000 square meters, including plant, warehouse, office buildings and other ancillary facilities. 68 major equipment will be purchased to reach annual production capacity of 2.6 billion cans and 0.5 billion milk powder cans.

  Investment Estimation and Fund Source: The total amount of investment is 200 million dollars, and plan to use foreign capital of 40 million dollars.

  Market Analysis: The main products include zip-top cans, milk powder cans and other metal containers, which are in short supply in the current domestic market, so the market prospect is broad.

  Construction Conditions: The project located at Dacheng Modern Manufacturing Industrial Park in Hebei Province, with convenient traffic .

  Benefit Analysis:After the completion of the project, the normal annual production capacity is zip-top cans 2.6 billion and milk powder cans 0.5 billion, realizes Sales income of 710 million dollars, with total profit of 93 million dollars.

  General Description of Chineses Sponsor : Langfang Zhongbaoshoufa Packet Co., Ltd., founded in 2013, is a company that producing and selling metal packaging products . The products include milk cans and zip-top cans.

  Cooperation Pattern : joint venture, cooperation

  Contact Person: Feng Qiu

  Address: Grand County modern manufacturing Industrial Park

  Tel.: 0086-0316-18931641010

  Post Code:065900

  E-mail: dcxdy@126.com

 

 

 

  Project of Electro-tricycle  with An Annual Output of 200,000 Sets.

 

  Project Content : The project covers an area of 158 mu, building area of 90,000 square meters, including plant, dormitory, office building and other ancillary facilities, 473 major equipments will be purchased to reach the normal annual production capacity of 200,000 sets of electric tricycle.

  Investment Estimation and Fund  Source:  The total amount of investment is 26 million dollars, and plan to use foreign capital of 15 million dollars.

  Market Analysis: With the battery manufacturing technology and process improvement, electric vehicle technology gradually mature and practical, it is energy saving, economic, convenient, secure the four major characteristics, not only has the portability of a bicycle, it has characteristics of fast speed of motor vehicles, non motor vehicles is green is very suitable for short distance travel, very much in line with the characteristics of consumption today China consumer and demand, the market prospect is broad..

  Construction Conditions:The project located at Qigeda Village Dashangtun Town Dacheng County in Hebei province, with very convenient traffic.

  Benefit Analysis: After the completion of the project, the normal annual output of electric tricycle is 200,000 sets, realizes sales income of 130 million dollars, with a total profit of 10 million dollars.

  General Description of Chineses Sponsor:  Langfang Sandi Electric Vehicle Co., Ltd. is specialized in electric vehicle manufacturing, and has more than 340 employees. The main products are electric tricycle and its accessories.

  CooperationPattern: joint venture, cooperation

  Contact Person: Shengli Feng

  Address: Dacheng County Qi Ge Da Cun Shang Tun Zhen

  Tel.: 0086-0316-15030603888

  Post Code:065900

  E-mail:dst5832608@163.com

Hosted by People’s Government of Langfang City
Undertaken by Office of People’s Government of Langfang City and Development & Reform Commission of Langfang City
Developed and Maintained by the Economic Information Center of Langfang City
Translated by Good Friends Translation Service Co., Ltd. of Langfang City